Dial - Paradyne COMSPHERE 3911 Installation And Operation Manual

COMSPHERE 3900 Series Modems
To access the Call Setup branch from the Top-Level menu, make the following selections:
Press the

Dial

For dial backup applications, Dial allows you to dial any telephone number stored in directory
locations 1–24. Any telephone number dialed using the DCP must already exist in a directory
location. Refer to Change Directory on page 10-6 for information on storing telephone numbers
in directory locations.
For leased backup applications, Dial allows you to switch to the backup leased line. Any
directory location may be used. The remote modem cannot automatically answer the simulated
call. Use the Answer function of the remote modem in conjunction with the Dial function to
manually switch to the backup leased line.
To access Dial from the Call Setup branch, make the following selection:
Select Dial to display the first directory telephone number.
To view other directory locations, select Nxt.
10-2
Leased:19.2
Call_Setup
F1 F2 F3
key until Call_Setup appears. Select Call_Setup.
Call Setup: >
Dial Disconnect
F1 F2 F3
DialDirectory:
Nxt 01:5551234
F1 F2 F3
DialDirectory:
Nxt 02:5461879
F1 F2 F3
September 1998 3910-A2-GN32-40