Paradyne COMSPHERE 3911 Installation And Operation Manual page 58

COMSPHERE 3900 Series Modems
To access Backup from the Status branch, make the following selection:
Press the
Select Backup.
The configuration of the current operating line facility (either APL primary or backup) appears
(Refer to Table 4-2).
Press the
This screen displays the configuration and condition of the inactive line facility (either APL
primary or backup).
There are four condition codes, Good, Bad, ????, and ' ' (blank).
Table 4-2 provides information about the Status Backup screens. The first column lists all
possible configurations for the modem's currently active line. The second column lists all
possible configurations for the modem's inactive lines. The third column provides information
about the inactive line condition.
XXXX represents the condition code of the inactive line.
4-8
key until Backup appears.
Status:
DTE Backup
F1 F2 F3
Status:Backup >
Line=Pri 4w APL
F1 F2 F3
key to display the next screen.
Status:Backup <
Bkup:2wAPL=Good
F3
F1 F2
September 1998 3910-A2-GN32-40