Paradyne COMSPHERE 3911 Installation And Operation Manual page 116

COMSPHERE 3900 Series Modems
To access PList from the Top-Level menu, make the following selections:
Press the
Within a network link, a control modem can communicate with a tributary modem by using the
tributary modem's network management address for polling functions. Each tributary modem
must have a different network management address. Refer to Misc in Chapter 5, DCP
Configuration, for a description of the network management address (NetMngmtAddress)
configuration option.
Over a diagnostic channel a tributary modem can communicate with control modems by using
the control modem's network management address for polling functions.
In the poll list, modems may be listed as either Active or Skip. Modems in the Active poll list
are polled by the upstream modem. Modems in the Skip poll list are passed over during the
polling process, but they are not deleted from the poll list.
Display
Display allows you to view the modem's poll list.
To access Display from the PList branch, make the following selection:
Select Display.
6-2
Leased:19.2
PList Control
F1 F2 F3
key until PList appears. Select PList.
Poll List:
Display Clear
F1 F2 F3
If there are no modems in the poll list when you select Display, the
message Poll List Empty! appears on the second line of the LCD.
Poll List:Disp
Nxt xxx yyyyyy
F1 F2 F3
September 1998
>
NOTE
3910-A2-GN32-40