Paradyne COMSPHERE 3911 Installation And Operation Manual page 118

COMSPHERE 3900 Series Modems
Press the
Change allows you to add modems to the Active poll list (Active), delete modems from both
Active and Skip poll lists (Delete), and move modems from the Active to the Skip poll list.
To implement Change, select the appropriate function (Active, Delete, or Skip). (For Skip, you
will need to press the
The function field (yyyyyy) displays the function you selected (Active, Delete, or Skip).
The address field (xxx) displays the network management address of the modem to be changed.
The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
cursor ( _ ) under the digit that will be incremented. Press the F2 (") key to increment the digit.
Press Enter (Ent) to implement the function (yyyyyy) you selected (Active, Delete, or Skip). The
message Command Complete appears on the second line of the LCD to indicate that the poll
list change has occurred. If the message Poll List Check appears, you have attempted to delete
an address that was not on the poll list, or you have attempted to add an address that was already
on the poll list. If the message Poll List Error appears, you are in a point-to-point mode that
does not support secondary channel (V.29). If the message Poll Lst too Big appears, you have
entered a number greater than the maximum number of downstream devices. To return to the
selected function (Active, Delete, or Skip), press the
increments upon returning to this function.
To exit this function (Active, Delete, or Skip) and remain in the PList Change branch, press the
6-4
key until Change appears. Select Change.
Poll List:Chang
Active
F1 F2
key until Skip appears.)
Poll List:yyyyyy
"xxx
Ent
F1 F2
key. To exit and return to the Top-Level menu, press the
>
Delete
F3
F3
key. The address automatically
September 1998
and keys to position the
key.
3910-A2-GN32-40