Paradyne COMSPHERE 3911 Installation And Operation Manual page 179

Originate Access Password
An Originate Access password is entered by a local user to gain access to a local 391x Series
modem. This password is embedded in the AT dial command and cannot be entered from the
diagnostic control panel (DCP).
The following example describes how to enter an Originate Access security password:
3910-A2-GN32-40
TYPE: ATD%abc123%T9,8005551234
PRESS: Enter
Where: ATD is the AT dial command.
T is the Tone (DTMF) dial modifier.
Percent (%) is the start and stop dial string command interrupt characters; the
Originate Access password must be enclosed by these characters.
abc123 is the 6-alphanumeric character Originate Access password.
Comma ( , ) is a pause dial parameter.
98005551234 is the phone number.
September 1998
Dial Access Security
12-17