Paradyne COMSPHERE 3911 Installation And Operation Manual page 173

Set Admin PsWd
Set Administrative Password is used to change the Administrative Password value. The
Administrative Password is an 8-digit decimal number that allows authorized users to enter the
Access Security Control function.
To change the Administrative Password, make the following selections:
Press
Select Set_Admin_PsWd.
The Administrative Password appears.
Press the F2 ( " ) key to increment password values.
Press the
password value is entered.
Press the F1 key to save the new password value.
3910-A2-GN32-40
If this value is forgotten, then the only way to access any of the
security functions is by selecting Reset Security. This restores the
password to a known value, but erases the contents of the modem's
security database
.
Set Access Ctrl
Set_Admin_PsWd
F1 F2 F3
until Set_Admin_PsWd appears.
Set Admin PsWd
"00000000
Ent
F1 F2 F3
key to move the cursor to the next position. Continue this sequence until the new
September 1998
NOTE
<
Dial Access Security
12-11