Adding A Shoe-Mounted Flash Unit - Nikon Z 7 Reference Manual

Adding a Shoe-Mounted Flash Unit

Radio-controlled flash units can be combined
with any of the following flash units mounted
on the camera accessory shoe:
• SB-5000: Before attaching the flash unit, set it
to radio-controlled master flash mode (a d
icon will appear at the top left corner of the display) and
choose group or remote repeating flash control. Once the unit
is attached, settings can be adjusted using the controls on the
flash unit or the options listed in the camera menus under
Group flash options > Master flash or under "M" in the
Remote repeating options display.
• SB-910, SB-900, SB-800, SB-700, SB-600: Configure the flash for
standalone use and use the controls on the flash unit to adjust
flash settings.
• SB-500, SB-400, SB-300: Mount the unit on the camera and adjust
settings using the camera Group flash options > Master flash
option.
372 Remote Flash Photography