Kyocera 3011i Operation Manual page 511

Troubleshooting > Troubleshooting
Message
Staple jam.
System error.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-66)
T
Message
The cover is open.
The device cannot be
connected because
allowed connections
would be exceeded.
The password does
not meet password
policy.
The phone receiver is
off the hook.
The removable
memory is not
formatted.
The slit glass requires
cleaning.
This ID card is already
registered to another
user.
This user account is
locked out.
Checkpoints
—
—
Checkpoints
Is there any cover which is
open?
―
Is the password expired?
Is the password policy
requirement (such as password
length or required characters)
changed?
―
Is the removable memory
formatted by this machine?
—
—
—
10-33
Corrective Actions
If a staple jam occurs, the
machine will stop and the
location of the jam will be
indicated on the screen. Leave
the machine on and follow the
instructions to remove the
jammed staple.
System error has occurred.
Follow the instructions on the
screen.
Corrective Actions
Close the cover indicated on the
screen.
Cancel a connection to a
portable device that is not being
used, or set the machine's auto
disconnect time to break
portable device connections.
Change the login password.
The job is canceled. Select
[End].
Confirm the password policy
requirements and change the
login password.
The job is canceled. Select
[End].
Put down the receiver.
Perform [Format] on this
machine.
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
Your ID card has already been
registered. Change it to another
ID card.
Contact administrator.
The job is canceled. Select
[End].
Reference
Page
page 10-80
—
Reference
Page
―
page 8-49
page 9-7
page 9-8
page 9-7
page 9-8
―
―
page 10-3
—
―