Kyocera 3011i Operation Manual page 370

Setup and Registration (System Menu) > System Menu
Item
Inserted Paper Mismatch
Paper Jam before Staple
Paper Output
[System Menu/Counter] key > [Common Settings] > [Paper Output]
Item
Paper Output
Set what to do when it is detected that the multipurpose tray paper size setting does
not match the actual paper size that is fed.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
The page from which printing is resumed when a paper jam occurs during a job with
stapling can be selected.
Value
Resume at Top of Page: Resume printing from the first page of the document.
Resume at Jammed Page: Resume printing from the page where the jam occurred.
NOTE
Requires the optional Document Finisher.
Select the output tray respectively for copy jobs, print jobs from Document Box,
computers, and FAX RX data.
Value:
• Inner Tray:
• Job Separator Tray:
with optional 1,000-Sheet Finisher
• Job Separator Tray:
• Finisher Tray:
with optional 3,000-Sheet Finisher
• Job Separator Tray:
• Tray A:
• Tray B:
with optional Mailbox
• Job Separator Tray:
• Tray A:
• Tray B:
• Tray 1 to 7:
NOTE
FAX RX data output can be specified when the optional FAX Kit is installed.
8-17
Description
Description
Outputs to the Inner Tray of the machine
Delivery to the Job Separator.
Delivery to the Job Separator.
Delivery to the Finisher Tray of the optional Document
Finisher.
Delivery to the Job Separator.
Delivery to the Tray A of the optional Document
Finisher
Delivery to the Tray B of the optional Document
Finisher
Delivery to the Job Separator.
Delivery to the Tray A of the optional Document
Finisher
Delivery to the Tray B of the optional Document
Finisher
Delivery to tray 1 to 7 (tray 1 is the uppermost tray) of
the optional Mailbox