Adjustment/Maintenance; Overview Of Adjustment/Maintenance; Tone Curve Adjustment - Kyocera 3011i Operation Manual

Troubleshooting > Adjustment/Maintenance

Adjustment/Maintenance

Overview of Adjustment/Maintenance

If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/
Maintenance in the system menu.
The table below lists the item you can carry out.
Item

Tone Curve Adjustment

Drum Refresh
Tone Curve Adjustment
After prolonged use, or from the effects of surrounding temperature or humidity, the printed output tone may differ from
the original. Perform this function to ensure consistency with the original tone.
A total of 2 pattern pages (No. 1 and 2) are printed during adjustment. The printed patterns are read sequentially during
the adjustment.
1
2
When the printed output tone may differ from the original, perform
this function to ensure consistency with the original tone.
Remove image blur and white dots from the printout.
Load paper.
IMPORTANT
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan the paper before loading it in the
cassette.
Loading in the Cassettes (page 3-4)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled
or folded may cause paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration
above).
• If paper is loaded without adjusting the paper length guide and paper width guide,
the paper may skew or become jammed.
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > "Tone Curve Adjustment"
[Next]
Description
10-39
Reference Page
page 10-39
page 10-40