Kyocera 3011i Operation Manual page 108

Installing and Setting up the Machine > Quick Setup Wizard
Network Setup
*1 This is displayed when the option of two FAX Kits has been installed.
*2 Inch version only.
*3 DRD reception mode is available for some countries.
*4 This setting does not appear in some regions.
*5 This function is not displayed when the optional 1,000-Sheet Finisher is installed.
*6 This function is displayed when [Weekly Timer] is set to [On].
*7 This function is displayed when [Network Selection] is set to [Wi-Fi].
*8 This function is displayed when [Network Selection] is set to [Wired Network].
*9 This function is displayed when [DHCP] is set to [Off].
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
3011i
3511i
1
2
3
Configures network settings.
1. Network
Model Name
3000
3500
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard]
Select a function.
Configure the settings.
Start the wizard. Follow the instructions on the screen to configure settings.
NOTE
If you experience difficulty configuring the settings, refer to the following:
Help Screen (page 2-25)
Control
End
Previous
Skip
Next
Back
Complete
Network Selection
Wi-Fi
DHCP
IP Address
Subnet Mask
Default Gateway
Login User Name
3000
3500
Exits the wizard. Settings configured so far are applied.
Returns to the previous item.
Advances to the next item without setting the current item.
Advances to the next screen.
Returns to the previous screen.
Register the settings and exit the wizard.
2-43
*7
*8
*9
*9
*9
Login Password
Description