Kyocera 3011i Operation Manual page 510

Troubleshooting > Troubleshooting
Message
Replace all originals
and press [Continue].
Running security
function...
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-66)
S
Message
Scanner memory is
*1
full.
Scheduled sending
jobs exceeded.
*1
Send Error.
Staple is empty.
Staple is empty.
(Manual Staple)
Checkpoints
—
—
Checkpoints
—
—
—
*1
Has the staple cartridge holder
run out of staples?
Has staple cartridge holder A
run out of staples?
Corrective Actions
Remove originals from the
document processor, put them
back in their original order, and
place them again. Select
[Continue] to resume printing.
Select [Cancel] to cancel the
job.
Running security function.
Please wait.
Corrective Actions
Scanning cannot be performed
due to insufficient memory of the
scanner. Follow the instructions
on the screen.
The number of jobs has
exceeded the limit set for
delayed transmission. Select
[End]. The job is canceled.
Wait until the delayed
transmission is executed, or
cancel the delayed transmission
and then perform the job again.
An error has occurred during
transmission. The job is
canceled. Select [End]. Refer to
Responding to Send Error for
the error code and corrective
actions.
If the staples are depleted, the
machine will stop and the
location of staple depletion will
be indicated on the screen.
Leave the machine on and
follow the instructions to replace
the staple case. Select
[Continue] to print without
stapling. Select [Cancel] to
cancel the job.
Add staples to staple cartridge
holder A.
10-32
Reference
Page
—
—
Reference
Page
—
—
page 10-35
page 10-10
page 10-11
page 10-11