Kyocera 3011i Operation Manual page 399

Setup and Registration (System Menu) > System Menu
Secure Comm. Error Log
[System Menu/Counter] key > [Report] > [Secure Comm. Error Log]
Item
Secure Comm. Error Log
Auto Sending
Destination
Subject
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login with administrator privileges. The factory default login user name and login password are set as
shown below.
3011i
3511i
Select whether to record the secure communication error log history.
Value: Off, On
NOTE
If [On] is selected, set the number of histories to be stored. The setting range is 1 to
1,000.
Select whether the secure communication error log history is automatically sent to the
set address when the number of entries reaches the number set in "Secure Comm.
Error Log".
Value: Off, On
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[On].
Set the destination to which secure communication error log histories are sent. E-mail
address only can be set as destination.
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[On].
Set the subject automatically entered when sending secure communication error log
histories by E-mail.
Value: Up to 60 characters
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[On].
Model Name Login User Name
3000
3500
Description
Login Password
3000
3500
8-46