Joining Documents In Custom Box - Kyocera 3011i Operation Manual

Operation on the Machine > Using Document Boxes

Joining Documents in Custom Box

You can join documents within a custom box into one file.
NOTE
You can only join a document to other documents in the same custom box. If necessary, move the documents to be
joined beforehand.
1
2
Display the screen.
[Home] key > [Custom Box] > Select the box > [Open]
NOTE
If a custom box is protected by a password, enter the correct password.
Join the document.
1
Select the documents in the list that you wish to join by selecting the checkbox.
The document is marked with a checkmark.
You can join up to 10 documents.
NOTE
To deselect, select the checkbox again and remove the checkmark.
2
Select [Join].
3
Arrange the documents into the order in which they are to be joined.
Highlight the document you want to rearrange and select [Up] or [Down] to move it to the
correct place in the sequence.
4
[Next] > [File Name] > Enter the file name for the joined document > [OK]
NOTE
Enter up to 64 characters as the file name.
5
[Join] > [Yes]
The documents are joined.
NOTE
After joining, the original documents are left unchanged. Delete the documents if they
are no longer needed.
5-60