Power Management - Juniper Allegro 2 Owner's Manual

Power Management

The Allegro 2 uses a Li-Ion rechargeable battery pack.
!
CAUTION: Only use batteries designed for the Allegro 2 from
an approved vendor. Use of non-approved batteries may
void your product warranty.
Charging the Battery Pack
To charge the battery pack, suspend the handheld, then
refer to the instructions in Chapter 1, Getting Started. It
typically takes 4 to 5 hours to fully charge a battery pack.
We recommend that you keep the handheld battery pack
charging when it is not in use for up to two weeks. When you
plug the handheld into the wall charger that comes with it,
the batteries are prevented from being overcharged.
The Li-Ion battery pack is charged most efficiently at room
temperature (68°F or 20°C). The battery pack will not charge
if it is too hot or too cold.
!
CAUTION: The Allegro 2 is not sealed against water and dust
when the battery door is not installed properly.
Battery Life
Battery life on a full charge can be 20 hours or more. This
varies depending on the applications used, backlight usage,
and radio usage.
To see the remaining battery power, tap on the top title bar
from any screen and select the battery icon from the list of
applications that drops down.
24
Allegro 2 Rugged Handheld Owner's Manual