Juniper Allegro 2 Owner's Manual page 59

3. Select the network to which you want to connect. If you
want to add a new network, select Add New from the
top of the list.
4. Configuration and authentication setup screens are
shown. Depending on the network you are connecting
to, you may need to make some selections from
pull down lists and enter information like a passkey.
Some information may not be required or will appear
automatically. When you are finished with the set up
screens, press Finish.
5. Select Network Adapters from the horizontal scrolling
menu near the top of the screen. For connection
options, select The Internet or Work (for office networks).
Other settings can be modified if necessary.
6. If you selected The Internet, you can open Internet
Explorer and begin using the Internet.
Once a Wi-Fi network is set up, the icon on the Home Page
turns blue and the name of the network is shown.
The Allegro 2 remembers the Wi-Fi network connections
created.
Wi-Fi Dialog Box
Whenever Wi-Fi is turned on, a dialog box might appear at
the bottom of the screen indicating the Wi-Fi networks the
Chapter 5 Wi-Fi Wireless Networking
55