Power Management - Juniper Allegro 3 Series Owner's Manual

Shift command
Shift, one key press
„
CAPS lock, two key presses
„
Release CAPS lock, three key presses
„
Shift + numeric key press to get special characters: 1=!,
„
2=@, 3=#, 4=$, 5=%, 6=^, 7=&, 8=*,9=(, 0=)
Power
Suspend or resume, one key press
„
Open Power Menu, press and hold
„

Power Management

The Allegro 3 uses a Li-Ion rechargeable battery pack.
Battery life on a full charge can be 20 hours or more. This
varies depending on the applications used, backlight
usage, and radio usage. Batteries are prevented from being
overcharged.
!
CAUTION: Only use batteries designed for the Allegro 3 from
an approved vendor. Use of non-approved batteries will
void your product warranty.
The Li-Ion battery pack is charged most efficiently at room
temperature (68°F or 20°C). The battery pack will not charge
if it is too hot or too cold.
!
CAUTION: The Allegro 3 is not sealed against water and dust
when the battery door is not installed properly.
Removing the Battery for Long-Term Storage
To power off the Allegro 3 for long-term storage, follow
these steps:
1. Press and briefly hold the power button and select
Power off.
2. Take out the battery pack and store it in a cool, dry
location.
3. When you are ready to power on the Allegro 3, replace
the battery pack. Plug in the AC wall charger and
connect it to the Allegro 3 BEFORE you power it on. Press
the power button and the device starts to boot up.
10
Allegro 3 Rugged Handheld Powered by Android Owner's Manual