Connecting To A Wi-Fi Network - Juniper Allegro 2 Owner's Manual

Wi-Fi Wireless Networking
The Allegro 2 has built-in Wi-Fi wireless networking to
connect to the Internet or a office network.

Connecting to a Wi-Fi Network

To use Wi-Fi, you need to be in range of a Wi-Fi access
point to make a connection. To actively look for a network
connection complete the following steps:
1. From the Home screen, turn Wi-Fi on by selecting the
Wi-Fi gadget
scanning the area for available Wi-Fi networks. (If the
Wi-Fi gadget is not on the Home screen, open the Start
screen, and select Getting Started. Select Set up Wi-Fi or
press Start > Settings > Connections > Wireless Manager.)
2. Tap-hold the Wi-Fi icon on the Home screen to go to
the Wi-Fi control panel. When the handheld completes
the scan, a list of available networks and their strengths
appears on the Wi-Fi Wireless screen. Click on the
Search for Networks button if none are automatically
listed.
54
Allegro 2 Rugged Handheld Owner's Manual
. The Allegro 2 automatically starts