Juniper Allegro 2 Owner's Manual page 94

Button Control Panel. For more information on how to
use the Button Control Panel, see Programmable Keys in
Chapter 2.
Trigger Mode While Holding Scan Button – Select Scan to
„
start scanning the moment the button is pressed. Select
Aim to turn on the aimer when the button is pressed and
to start scanning when the button is released.
Beep On and Visual On – Select options for audio and
„
visual indicators based on good or bad scan reads.
Test Screen
The Test screen has the following functions:
Scan – Tap Scan to test the settings and to view
„
information about a scanned barcode. The button you
set up on the keypad can also be used.
Code Type and Scan Data – After a successful scan, the
„
barcode code type and the scan data are displayed.
90
Allegro 2 Rugged Handheld Owner's Manual