Juniper Allegro 2 Owner's Manual page 27

Alternately, go to the Backlight control panel. Press Start >
Settings > System > Backlight. Near the bottom of the screen
it says "Adjust Power Settings to conserve power." Select the
hyperlink power (see the previous Battery Power screen).
The Power control panel appears. Select Advanced from
the horizontal scrolling menu near the top of the screen.
For battery and external power, select how long the screen
stays on when it is not in use. Shorter times save battery
power.
Disabling and Enabling the Touchscreen
You can disable the touchscreen. This is useful when you
are running an application and you want to see the screen
while avoiding accidental touchscreen activation. You can
move around and make selections using the keyboard. The
touchscreen can also be disabled for cleaning purposes.
When the touchscreen is disabled, this icon
title bar until the touchscreen is enabled again.
Press the
„
touchscreen on and off.
Press and hold the power key
„
menu. Select Disable TS. To enable the touchscreen using
this menu, use the down arrow key
TS, and press enter
+ backspace
.
keys to toggle the
to display the Power Key
to highlight Enable
Chapter 2 Hardware Components
is shown in the
23