Error Messages - Lexmark MX71x Service Manual

332 error messages

321–345 error messages
Error code Description
332.54 250/550‑sheet trays: No encoder feedback detected
from the tray 3 transport motor.
332.54 HCIT: No encoder feedback detected from the tray 3
transport motor.
332.55 250/550‑sheet trays: Motor stop error—the tray 3
transport motor kept on running some time after the
motor was commanded to stop.
332.55 HCIT: Motor stop error—the tray 3 transport motor
kept on running some time after the motor was
commanded to stop.
332.56 250/550‑sheet trays: The tray 3 transport motor went
over the normal speed.
332.56 HCIT: The tray 3 transport motor went over the
normal speed.
334 error messages
321–345 error messages
Error code Description
334.57 No encoder feedback detected from the tray 3 (HCIT)
lift motor.
334.58 Motor stop error—the tray 3 (HCIT) lift motor kept on
running some time after the motor was commanded
to stop.
334.59 The tray 3 (HCIT) lift motor went over the normal
speed
335 error messages
321–345 error messages
Error code Description
335.60 Hardware Error—tray 3 board ID unknown
335.61 Hardware Error—tray 3 option type unknown
335.62 Hardware Error—tray 3 product ID unknown
335.63 Hardware Error—tray 3 sensors are not plugged on
the board
Action
Go to "250/550-sheet transport motor failure
service check" on page
Go to "HCIT transport motor failure service check"
on page
Go to "250/550-sheet transport motor failure
service check" on page
Go to "HCIT transport motor failure service check"
on page
Go to "250/550-sheet transport motor failure
service check" on page
Go to "HCIT transport motor failure service check"
on page
Action
Go to "HCIT lift drive motor failure service check"
on page
Action
Go to "250/550-sheet controller board failure
service check" on page
Diagnostic information
289
293.
296.
293.
296.
293.
296.
298.
295.
7463