X]‑Page Jam, Remove Tray 1 To Clear Duplex. [235–239] - Lexmark MX71x Service Manual

[x]‑page jam, remove tray 1 to clear duplex. [235–239]
1
Lift the tray slightly, and then pull it out completely.
2
Push down the front duplex flap, then firmly grasp the jammed paper, and then gently pull the paper to the right
and out of the printer.
Note: Make sure all paper fragments are removed.
3
Insert the tray.
4
To clear the message and continue printing, select Next >
23y paper jam messages
Error code Description
230.01 Media remains on the sensor (duplex path)
during the warm up sequence.
230.02 The media reached the sensor (duplex path)
sooner than the specified time.
230.03 The media is late reaching the sensor (duplex
path) within the specified time.
> Clear the jam, press OK >
Action
Go to "Sensor (duplex path) static jam service check" on
page 105.
Go to "Sensor (duplex path) early arriving jam service check"
on page 107.
Go to "Sensor (duplex path) never‑ or late‑arriving jam service
check" on page 106.
Diagnostic information
104
7463
.