Lexmark MX71x Service Manual page 45

December 20, 2012
•
Changed "Adjusting skew" to "ADF skew adjustments"
• Updated the following topics:
–
Sensor (input) never or late arriving jam service check
–
250/550-sheet media tray option jam service check
– HCIT jam service check
–
ADF skew adjustment (front side)
–
ADF skew adjustment (back side)
– ADF assembly removal
–
ADF front side drive parts pack removal
–
ADF left hinge removal
–
ADF pick roller removal
–
ADF right hinge removal
–
Control panel front cover removal
– Interrupt with flag sensor (ADF 2nd scan) removal
–
Interrupt with flag sensor (ADF media exit) removal
–
Flatbed scanner assembly removal
– Laser printhead removal
–
Control panel latch removal
–
Assembly 2: Covers (MX81x)
– Assembly 8: Frame Assembly
–
Assembly 9: Control panel (MX71x)
–
Assembly 10: Control panel 10inch display (MX81x)
– Assembly 11: Paper tray
–
Assembly 15: ADF electronics
–
Assembly 16: Flatbed scanner (MX710 and MX711)
– Assembly 17: Flatbed scanner (MX810, MX811 and MX812)
–
Assembly 20: 250-sheet tray option (MX710 and MX711)
–
Assembly 21: 550-sheet tray option (MX710 and MX711)
– Assembly 22: 550-sheet tray option (MX810, MX811, MX812)
–
Assembly 24: High capacity input tray option 3 (MX810, MX811, MX812)
–
Assembly 34: Miscellaneous
• Updated the following topics:
–
Sensor (input) never or late arriving jam service check
–
250/550-sheet media tray option jam service check
– HCIT jam service check
–
ADF skew adjustment (front side)
–
ADF skew adjustment (back side)
–
ADF assembly removal
– ADF front side drive parts pack removal
Preface
45
7463