Lvps Failure Service Check - Lexmark MX71x Service Manual

LVPS failure service check

Action
Step 1
POR the printer.
Does the error remain?
Step 2
Make sure that all of the LVPS cables are properly connected.
Does the error remain?
Step 3
a
Replace the LVPS. See
b
POR the printer.
Does the error remain?
Step 4
Replace the controller board. See
page 422.
Does the error remain?
13y errors
13y error messages
Error code Description
130.01 Transfer servo error
133.05 Toner Level Sensing reading above
maximum expected value
133.06 Toner Level Sensing reading below
minimum expected value
133.07 Toner failed to replenish into the Imaging
Unit
133.08 Excessive toner level sensing noise
"LVPS removal" on page 445.
"Controller board removal" on
Diagnostic information
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Contact the next level
of support.
Action
Reset the machine. If the error remains, replace the imaging
unit.
Go to "Toner level sensing service check" on page
251
7463
No
The problem is solved.
The problem is solved.
The problem is solved.
The problem is solved.
252.