Error code
Description
457.89
Staple, hole punch finisher: Stapler failed to prime
after a stapling operation
457.90
Finisher/offset stacker: Stapler failed to prime before
a stapling operation
457.90
Staple, hole punch finisher: Stapler failed to prime
before a stapling operation
458 paper jam messages
Error code
Description
458.41
HPU motor stalled.
458.42
HPU motor did not reach the required speed.
458.43
Took too long to ramp up HPU motor.
458.53
HPU motor went over the required speed.
459 paper jam messages
Error code
Description
459.42
HPU feed motor did not reach the required speed.
459.43
Took too long to ramp up HPU feed motor.
459.53
HPU feed motor went over the required speed.
459.71
HPU motor failed to return to its home position.
459.72
HPU home position sensor was not detected.
459.75
A communication error occurred between the HPU
and the stapler.
459.81
HPU motor jammed.
459.84
Sensor (HPU media align) was blocked.
459.85
Media remains detected by the sensor (HPU trailing
edge).
459.86
Media remains detected by the sensor (HPU media
align).
459.87
Media fed did not reach the sensor (HPU trailing edge)
on time.
459.89
The leading edge of the fed media did not reach the
sensor (HPU media align) on time after DMID.
459.90
The leading edge of the fed media did not reach the
sensor (HPU media align) on time.
Action
Go to
"Stapler carriage (HPU) jam service check" on
page
208.
Go to
"Stapler carriage jam service check" on
page
191.
Go to
"Stapler carriage (HPU) jam service check" on
page
208.
Action
Go to
"HPU motor jam service check" on page
209.
Action
Go to
"HPU feed motor jam service check" on
page
211.
Go to
"HPU motor jam service check" on page
209.
Go to
"HPU communication error jam service
check" on page
Go to
"HPU motor jam service check" on page
209.
Go to
"Sensor (HPU media align) jam service check"
on page
Go to
"Sensor (HPU trailing edge) jam service
check" on page
Go to
"Sensor (HPU media align) jam service check"
on page
Go to
"Sensor (HPU trailing edge) jam service
check" on page
Go to
"HPU communication error jam service
check" on page
Go to
"Sensor (HPU media align) jam service check"
on page
Diagnostic information
176
212.
213.
214.
213.
214.
212.
213.
7463