Gain Value; White Balance Memory - Sony PDW-850 Operation Manual

and external devices connected to the SDI
OUT 1/2 connectors (HDSDI output)
mutually controlling recording.
SNGL: Appears when SINGLE CLIP MODE in
the CAM CONFIG 1 page of the
MAINTENANCE menu is set to "ON", and
the unit is searching or playing a clip (see
page 79).
1) SDI OUT 1 SELECT or SDI OUT 2 SELECT on the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
b Setting change and adjustment
progress message display area
For details, see "Change confirmation/adjustment
progress messages" (page 203).
c External input status and aberration
correction function
EXT HDSDI/SDSDI/VBS: When the REC
VIDEO SOURCE item on the SOURCE SEL
page of the OPERATION menu has been set
to EXT, then "EXT" and the signal type
(HDSDI, SDSDI, or VBS) flashes when a
valid signal is input to this unit.
For details, see "Recording video from external
devices" (page 98).
ALAC: Appears when ALAC in the CAM
CONFIG 3 page of the MAINTENANCE
menu is set to "AUTO" (see page 181).
d Electric color temperature filter/Scene
file number
The electric color temperature filter display
appears when the CC 5600K function is set to
ON.
When DISP SCENE FILE on the VF DISP 3 page
of the OPERATION menu is set to "ON", the
number of the currently loaded scene file ("S1" to
"S5") appears instead of the filter display.
e Filter
Indicates the currently selected filter type (see
page 14).
The optical CC filter position (A, B, C, or D)
appears to the right side of the ND filter display
(1 to 4).
f White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
A: Displayed when the WHITE BAL switch is set
1)
are to A.
B: Displayed when the WHITE BAL switch is set
to B.
P: Displayed when the WHITE BAL switch is set
to PRST or when the preset button on an RM-
B170 has been pushed.
T: Displayed when ATW is being used.
g Timecode
Indicates the elapsed recording/playback time,
timecode, user bits or other information selected
by the DISPLAY switch (see page 19).
h Gain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.
i Shutter speed
Indicates the shutter speed or the shutter mode.
However, if the SHUTTER selector (see page 14)
is set to OFF, nothing is displayed.
For details of the displayed shutter speed, see
"Setting the Electronic Shutter" (page 60).
j Operation/alarm display area and clip
transfer status display area
For details, see "Operation/alarm messages"
(page 250).
It also displays clip transfer status when an
optional CBK-WA100 is connected.
k Audio level
Indicates the level of audio channel 1 and channel
2. The peak indication of the VDR level meter is
related as follows to the audio level.
1
2
3
1 Audio channel 1 level indicator
2 Audio channel 2 level indicator
3 VDR level meter indicator
The segment colors change from gray to white at
or above the AU REF LEVEL set on the AUDIO-
2 page of the MAINTENANCE menu. This
setting does not affect the relationship between
the number of lit segments and the audio levels.
The example in the above figure shows the colors
when AU REF LEVEL is set to –20 dB.
Locations and Functions of Parts and Controls
-52 -28 -20 -12 -8 (dB)
31