Accessory Attachments - Sony PDW-850 Operation Manual

c DC IN (DC power input) connector
(XLR type, 4-pin, male)
To operate the camcorder from an AC power
supply, connect an optional DC power cord to this
terminal and then connect the cord to the DC
output terminal of the BC-L70, BC-L160, or
another battery charger.
d DC OUT 12V (DC power output)
connector (4-pin, female)
Supplies power for a CBK-WA100 Wireless
Adaptor or WRR-860A/861/862 UHF
Synthesized Diversity Tuner (not supplied)
(maximum 1.0 A).
Do not connect any equipment other than the
wireless adaptor or UHF synthesized diversity
tuner.
e Battery attachment shoe
Attach a BP-L80S/FL75 Battery Pack.
Alternatively, you can attach an AC-DN2B/
DN10 AC Adaptor to operate the camcorder on
AC power supply.
For details about how to attach the battery or AC
adaptor, see "Preparing a Power Supply" (page 33).
For information about attaching a synthesized tuner,
see "Attaching a UHF portable tuner (for a UHF
wireless microphone system)" (page 45).
Note
For your safety, and to ensure proper operation of the
camcorder, Sony recommends the use of the following
battery packs: BP-L80S and BP-FL75.
12 Locations and Functions of Parts and Controls

Accessory attachments

1
8 9 0 qa qs qd
a Shoulder strap fitting
Attach the supplied shoulder strap (see page 49).
b Accessory fitting shoe
Attach an optional accessory such as a video light
(see page 48).
c Viewfinder front-to-back positioning
lever
To adjust the viewfinder position in the front-to-
back direction, loosen this lever and the LOCK
knob. After adjustment, retighten this lever and
the LOCK knob.
d Viewfinder left-to-right positioning ring
Loosen this ring to adjust the left-to-right position
of the viewfinder (see page 35).
e Viewfinder fitting shoe
Attach an optional viewfinder.
23 4 567
qf qgqh qj qk
ql