Sony PDW-850 Operation Manual page 202

Item
DISP DISC
DISP IRIS
a) The viewfinder display can be also turned on or
off by using the DISPLAY of the DISPLAY/
ASPECT switch on the viewfinder.
b) For detailed information on the display mode, see
"Change confirmation/adjustment progress
messages" (page 203).
VF DISP 2 page
Item
DISP ZOOM
DISP COLOR
TEMP
DISP BATT
a)
REMAIN
DISP DC IN
DISP WRR RF
LVL
DISP REC
FORMAT
DISP CLIP
NO(PB)
DISP
TIMECODE
DISP ALAC
a) When an Anton Bauer battery system or a BP-
GL65/GL95 battery pack is installed, the
remaining battery power is shown as a
percentage value (%) according to the setting of
this item.
INT: When one of the above batteries is
installed, the remaining power is shown as a
percentage value (%) when there is a change
in the value or when the power is low.
AUTO: The remaining power is shown as a
percentage value (%) when one of the above
batteries is installed. Otherwise the voltage
(VOLT) is displayed continuously.
VOLT: The voltage (VOLT) is displayed
continuously.
202 Setting the Status Display on the Viewfinder Screen and the LCD Monitor
Description
Remaining disc capacity
indicator
Iris opening indicator
Description
Zoom position indicator
Displays the color
temperature.
Displays the battery
voltage/remaining capacity
of an internal battery pack
or an external battery
connected to the DC IN
connector.
Displayed when the power
is supplied from an external
battery connected to the
DC IN connector.
Displays the reception level
of the wireless microphone.
Displays the recording
format.
During playback, displays
the clip number and total
number of clips.
Displays the timecode.
Aberration correction
function display
VF DISP 3 page
Item Description
DISP CLIP Selects the type of clip name to
NAME
display.
DISP SCENE Turns on or off the display of
FILE the number of the currently
loaded scene file.
DISP CONT Turns on or off the Clip
REC Continuous Rec display.
LOW LIGHT Turns on and off the on-screen
warning that the average level
of the video has dropped
beneath a set level.
LOW LIGHT Sets the LOW LIGHT
LEVEL threshold value.
VF BATT Specifies the remaining battery
WARNING capacity level that starts the
flashing warning in the
viewfinder.
ABSOLUTE Turns on and off the mode that
VALUE displays numeric menu
settings as absolute values.
a) Displayed clip names are also linked to the
settings of "Display Title" and "Planning Clip
Name in Clip Info. Area" in the Disc Menu.
b) This makes it possible to display settings that
include reference settings, stored with STORE
ALL PRESET or other functions, as absolute
values.
VF DISP 4 page
Item Description
DISP GPS GPS reception status display
WIRELESS CBK-WA100 wireless
STATUS reception status
EXT. MEDIA CBK-WA100 SD card
REMAIN remaining media display
SENDING Clip transfer to CBK-WA100
CLIP INFO progress display
3
Turn the MENU knob to select the
desired setting (ON, OFF, or value), and
press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
a)
b)