Loading Saved Data From A Usb Flash Drive; Returning The User File Settings To The Standard Settings - Sony PDW-850 Operation Manual

To select the file information items to be
displayed
You can select the user file information items to
be displayed on the USER FILE SAVE page and
USER FILE LOAD page (P00 to P19), that are
used to save and load data to and from a USB
flash drive.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display a USER FILE LOAD page or
USER FILE SAVE page of the USER
FILE menu, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" (page 193).
2
Select DISPLAY MODE, and press the
MENU knob.
3
Select the desired type of file
information, and press the MENU
knob.
Display type
ALL
F.ID
DATE
MODEL
Loading saved data from a USB
flash drive
Note
The data loaded from the USB flash drive overwrites the
data saved in the camcorder.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the USER FILE page of the
FILE menu, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" (page 193).
2
Select USER FILE LOAD, and press
the MENU knob.
The USER LOAD page appears.
222 Saving and Recalling User Files
Description
File ID (10 characters) and
date (year/month/day)
File ID (16 characters)
Date saved (year/month/day/
hours/minutes/seconds)
Information on the model
3
Turn the MENU knob until the page
which contains the desired file number
appears, then press the MENU knob.
4
Select the desired file number, and
press the MENU knob.
The message "LOAD OK? YES b NO"
appears.
5
To carry out the load, select YES and
press the MENU knob.
To cancel, press the MENU knob leaving b
pointing to NO.
The access indicator lights.
When the load is completed, the message
"COMPLETE" appears and the access
indicator goes off.
If data cannot be loaded
If one of the following error messages appears
during or after the load operation, then the data
was not loaded.
Error Cause
message
NO USB No USB flash
MEMORY drive is
(flashing) connected.
USB A USB flash
MEMORY drive error
ERROR occurred.
(flashing)
FILE The USB flash
ERROR drive contains
(flashing) data that cannot
be loaded into
this camcorder.
Returning the user file settings to
the standard settings
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the USER FILE page of the
FILE menu, and press the MENU knob.
Action
Connect or
reconnect the
USB flash drive.
Reconnect to
confirm the
error, and
consult a Sony
service
representative.
Data saved on a
USB flash drive
using a
camcorder
whose model is
not the same as
this camcorder
cannot be loaded
into this
camcorder.