Sony PDW-850 Operation Manual page 211

Functions to be assigned to the ASSIGN 2
(slide-type) switch
Function Content
OFF Assigns no function.
FRONT MIC Assigns the function that
switches between stereo and
monaural when a stereo
microphone is connected.
PICTURE Assigns execution of
CACHE recording in picture cache
mode.
SUPER Assigns a mixing switch
(VFDISP&M function that selects mixing or
ENU) no mixing of superimposed
viewfinder and menu text data
into the video signals output
from the SDI OUT 2 or TEST
OUT connector, when SDI
OUT 2 SUPER or TEST OUT
SUPER on the OUTPUT 1
page of the OPERATION
menu are set to ON.
MARKER Assigns the function that
displays or hides all
a)
markers.
REC VIDEO Switches the recording target
SOURCE video between the video shot
by the camera and the video
input from an external device
(VBS or SD-SDI/HD-SDI).
ZEBRA Assigns the zebra pattern
display function.
FREEZE MIX Assigns the function that
mixes a still picture
(monochrome) and camera
video (color) (effective for
framing shots).
DIGITAL Assigns the function that
b) electronically magnifies the
EXTENDER
central part of the picture. (All
video output is magnified,
including recorded video.)
x2, x3, and x4 are available
for selection.
CLIP CONT Assigns the function that
REC turns the Clip Continuous Rec
function on and off.
UA01 to Assigns the items assigned in
c) the ASSIGN SEL menu.
UA10
VF COLOR Assigns the VF color detail
DETAIL function.
a) Even when the MARKER item is set to OFF on
the MARKER page of the USER menu, the
ASSIGN 2 switch allows you to display or not to
display all markers.
b) Video momentarily becomes black and audio is
momentarily muted when the digital extender is
switched on and off.
c) This does not appear if nothing is assigned in the
Assign menu.
Note
For functions that are assigned to the ASSIGN 2
(slide-type) switch, you cannot change those
settings using other menus. The function assigned
to the ASSIGN 2 switch takes precedence over the
menu setting.
3
Select the desired function, and press
the MENU knob.
The function is assigned, and the
ASSIGNABLE SW page appears again.
To add functions that can be assigned to
the ASSIGN switches
When shipped from the factory, UA01 to UA10
user-assignable items in the ASSIGN switch
function list are blank.
You can register up to ten functions in these
items.
1
Display the EDIT ASSIGN SEL page of
the USER MENU CUSTOMIZE menu,
and press the MENU knob.
For details about using the menus, see "Menu
Operations" (page 193).
E21 EDIT ASSIGN SEL
Adjustments and Settings from Menus
TOP
211