Locations And Functions Of Parts And Controls; Power Supply; Power Switch - Sony PDW-850 Operation Manual

Supports digital wireless microphone
system
The digital wireless microphone system offers
high-quality, superior resistance to noise, and
simultaneous multi-channel operation.
Installation of the DWR-S02D Digital Wireless
1)
Receiver enables simultaneous reception of two
channels.
1) These products are not available in countries where
they are prohibited by radio frequency regulations.
3.5-inch high-resolution LCD monitor
The high-resolution 3.5-inch QHD color LCD
monitor displays audio meters, menus, disc and
battery capacity indications, and thumbnails of
clips stored on disc.
Inherits unique features of XDCAM series
The unit inherits the workflow features of the
XDCAM series, including thumbnail display and
metadata management, and improves them by
introducing an improved man-machine interface.
Metadata includes new user-settable clip flags
(OK/NG/KEEP) in addition to the existing Rec
Start essence marks. The new metadata types
enable more efficient workflows when clips
recorded on this unit are edited on nonlinear
editing systems.
Software downloads
When the unit is used with a PC connection,
download device drivers, plug-ins, and
application software, where applicable, from the
Sony Professional products web site.
Sony Professional products and solutions site
homepage:
U.S.A. http://pro.sony.com
Canada http://www.sonybiz.ca
Latin America http://sonypro-latin.com
Europe, Middle East and Africa
http://www.pro.sony.eu
Japan http://www.sonybsc.com
Asia Pacific http://pro.sony-asia.com
Korea http://bp.sony.co.kr
China http://pro.sony.com.cn
Locations and Functions
of Parts and Controls

Power supply

1 2
a LIGHT switch
Determines how a video light connected to the
LIGHT connector (see page 13) is turned on and
off.
AUTO: When the POWER switch of the video
light is in the on position, the video light is
turned on automatically while the camcorder
is recording.
MANUAL: You can turn the video light on or off
manually, using its own switch.
Notes
• When this switch is set to AUTO, at the beginning of
the recording, the picture is recorded even though the
lighting may fluctuate until the video light comes on.
If the beginning of the recording is important, you
should set this switch to MANUAL.
• To ensure proper operation of the video light, Sony
recommends the use of the BP-L80S Battery Pack with
the camcorder.
b POWER switch
Turns the main power supply on and off.

Locations and Functions of Parts and Controls

3 4 5
11