Gain Value; Electric Color Temperature Filter - Sony PXW-X320 Operating Instructions Manual

Indicator Meaning
zREC DV recording in progress
STBY Standby for DV recording
e Video level indicator [M]
Suitable ND filter indicator
Clip uploading status indicator
An indication is displayed together with an
appropriate ND filter position number when the
light level of the subject is too high or too low.
Indicates the status for clip uploading when an
optional CBK-WA101 Wireless Adapter is
connected.
f Timecode
Caution message
Indicates the elapsed recording/playback time,
timecode, user bits data or other information
selected by the DISPLAY switch (see page 16).
Also indicates a caution message when caution is
required such as when you try to change settings.
g Brightness level
Indicates the average brightness level (%) of the
detection area.
h External input source
Indicates the type of external input signal (HDV)
to be recorded.
i External input setting indicator
Indicates "EXT" when an external input is
recorded.
j Media remaining space indicator for
the CBK-WA101 Wireless Adapter (not
supplied)
k USB media icon indicator (see page 177)
or status indicator of the CBK-WA101
Wireless Adapter (not supplied)
l Electric color temperature filter
Appears when the CC 5600K function is set to on.
m Filter indicator
Indicates the currently selected ND filter position
number (see page 12).
When Electrical CC is assigned to an assignable
switch, the electrical filter position (A/B/C/D)
appears to the right of the ND filter position (1 to
4).
n White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
ATW: ATW (Auto Tracing White Balance) mode
W:A: Memory A mode
W:B: Memory B mode
W:P: Preset mode
3200: When the assignable switch to which Color
Temp SW 3200K has been assigned is on
4300: When the assignable switch to which Color
Temp SW 4300K has been assigned is on
5600: When the assignable switch to which Color
Temp SW 5600K has been assigned is on
6300: When the assignable switch to which Color
Temp SW 6300K has been assigned is on
o Gain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.
p Recording status indicator
When "OPERATION" > "Super Impose" >
"Super (Rec Status Indicator)" is set to "On" in
the setup menu, B marks are displayed as the
recording proceeds.
q Shutter
Indicates the shutter speed or the shutter mode.
For details, see "Setting the Electronic Shutter"
(page 51).
r Audio level meters
Indicate the audio levels of channel 1 and channel
2.
s Remaining media capacity
Indicates the recording time remaining for each of
the media loaded in the slots. The available time
for recording with the current video format
(recording bit rate) is calculated according to the
remaining space of each media and indicated in
time units of minutes. A lock icon appears if the
media is write-protected.
t Histogram
Shows a pixel distribution of video luminance
(HD mode only).
u Flashband reduce status indicator
Appears when "Flashband Reduce" (see
page 125) of the OPERATION menu is set to
27