Filter Position; Gain Value - Sony PMW-400K Operating Instructions Manual

m Filter position
Indicates the currently selected ND filter position
number. (see page 13).
When Electrical CC is assigned to an assignable
switch, the electrical filter position (A/B/C/D)
appears to the right of the ND filter position (1 to
4).
n White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
ATW: ATW (Auto Tracing White Balance) mode
W:A: Memory A mode
W:B: Memory B mode
W:P: Preset mode
3200: When the assignable switch to which Color
Temp SW 3200K has been assigned is on
4300: When the assignable switch to which Color
Temp SW 4300K has been assigned is on
5600: When the assignable switch to which Color
Temp SW 5600K has been assigned is on
6300: When the assignable switch to which Color
Temp SW 6300K has been assigned is on
o Gain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.
p Recording status indication
When "OPERATION" > "Super Impose" >
"Super (Rec Status Indicator)" is set to "On" in
the setup menu, B marks are displayed as the
recording proceeds.
q Shutter
Indicates the shutter speed or the shutter mode.
For details, see "Setting the Electronic Shutter"
(page 50).
r Audio level meters
Indicate the audio levels of channel 1 and channel
2.
s Remaining media capacity
Indicates the recording time remaining for each of
the media loaded in the slots. The available time
for recording with the current video format
(recording bit rate) is calculated according to the
remaining space of each media and indicated in
time units of minutes. A lock icon appears if the
media is write-protected.
28 Viewfinder Screen Display
t Histogram
Shows a pixel distribution of video luminance
(HD mode only).
u Flashband reduce status indication
Appears when "Flashband Reduce" (see
page 124) of the OPERATION menu is set to
"On" and the flashband reduce function is
activated.
v Iris position (when the lens is mounted)
Indicates the iris position and the setting for iris
override (reference value for the lens iris) (see
page 52).
The iris override setting is indicated by four
segments indicator as follows.
Reference Indicator
value
+0.25 Lower left segment is lit in grey.
x
+0.5 x Left two segments are lit in grey.
x
+0.75 x Left two segments and lower
xx
right segment are lit in grey.
xx
+1 All segments are lit in grey.
xx
–0.25 Lower left segment is lit in
s
white.
s
–0.5 Left two segments are lit in
s
white.
s
–0.75 Left two segments and lower
ss
right segment are lit in white.
–1 ss All segments are lit in white.
ss