Checking User-Defined Essence Marks; Formatting Discs - Sony PDW-850 Operation Manual

2
Select "Settings", and then press the
SET/S.SEL button or the MENU knob.
3
Select "Planning Clip Name in Clip
Info. Area", and then press the SET/
S.SEL button or the MENU knob.
See page 29 for more information about the
Clip Info. Area.
4
Select one of the following, and then
press the SET/S.SEL button or the
MENU knob.
ASCII Clip Name: Display the ASCII
format title (see page 96).
Clip Name: Display the UTF-8 format title
(see page 96).
To display clip names in the clip
information area in the viewfinder
1
Display the Disc Menu.
2
Select "Settings", and then press the
SET/S.SEL button or the MENU knob.
3
Select "Planning Clip Name Display"
(whether to display the clip name in the
viewfinder screen), and then press the
SET/S.SEL button or the MENU knob.
4
Select "Enable", and then press the
SET/S.SEL button or the MENU knob.
Clip information is always shown in the warning
indicator area of the LCD monitor if the LCD
monitor is set to status display.
Checking user-defined essence
marks
You can display the names of user-defined Shot
Mark0 to Shot Mark9 essence marks in planning
metadata (UTF-8 format, maximum 32 bytes).
1
Display the Planning Metadata
Properties screen (see page 134) for the
planning metadata loaded into this unit.
The , button is enabled when the planning
metadata contains user-defined essence
marks (see page 98).
136 Disc Operations
2
Press ,, and then turn the SET/S.SEL
button or the MENU knob.
The User Defined Essence Marks screen
appears.

Formatting discs

See page 114 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Format Disc, and then press the
SET/S.SEL button or the MENU knob.
A message appears asking you to confirm the
format.
Format Disc
All Clips, Clip Lists and
Non-AV Data (General Files)
will be Deleted.
Format OK?
3
Select OK, and then press the SET/
S.SEL button or the MENU knob.
To cancel the format
Select Cancel, and then press the SET/S.SEL
button or the MENU knob.
To continue by formatting another disc
Exchange the disc, select OK, and then press
the SET/S.SEL button or the MENU knob.
To exit the formatting screen
Press the SET/S.SEL button or the MENU
knob with Exit selected.
To disable the Format Disc command
To prevent inadvertent disc formatting, resulting
in the loss of recorded data, you can disable the
Format Disc command.
See page 114 for more information about GUI
screen operations.
OK
Cancel