Sony PDW-850 Operation Manual page 102

1
Search for the video of the clip (being
played or stopped) that you want to
copy.
2
Select COPY CURRENT CLP in the
MEMORY REC page of the
OPERATION menu, and then press the
MENU knob.
The message "EXECUTE OK?" appears.
3
Select "YES", and then press the
MENU knob.
During the execution of the copy, the
message "MEMORY ACCESS **%"
appears in the viewfinder and on the LCD
monitor, where "**" is replaced with a
number (0 to 99) that indicates the
percentage completed. When processing
finishes, the message "COMPLETE!"
appears.
The proxy data of the current clip (the
currently stopped clip, or the one that being
played) is copied to the USB flash drive.
To copy the proxy data of all clips on a
disc to a USB flash drive
Proceed as follows to copy the proxy data of all
clips on a disc to a USB flash drive.
Note
The following functions stop during execution of a copy.
• Playback cue up
• Picture Cache recording
1
Select COPY ALL CLIPS in the
MEMORY REC page of the
OPERATION menu, and then press the
MENU knob.
The message "EXECUTE OK?" appears.
2
Select "YES", and then press the
MENU knob.
During the execution of the copy, the
message "MEMORY ACCESS **%"
appears in the viewfinder and on the LCD
monitor, where "**" is replaced with a
number (0 to 99) that indicates the
percentage completed. When processing
finishes, the message "COMPLETE!"
appears.
The proxy data of all clips on the disc is
copied to the USB flash drive.
102 Advanced Operations for Shooting
Note
The message "M. Shortage" appears when the mount of
data to be copied exceed the free capacity of the USB
flash drive. The copy is not executed. Exchange the USB
flash drive for one with enough free capacity.
To cancel a copy to a USB flash drive
1
Select ABORT COPY in the MEMORY
REC page of the OPERATION menu,
and then press the MENU knob.
The message "EXECUTE OK?" appears.
2
Select "YES", and then press the
MENU knob.
The message "ABORTING" appears in the
viewfinder and on the LCD monitor while
the unit is aborting the copy operation. The
message "ABORT" appears when the abort
processing is completed.
To delete recorded proxy data
To delete data recorded on the disc at the same
time that you delete proxy data from a USB flash
drive, execute the DELETE CLIP command in
the Thumbnail menu (see page 125).
To delete proxy data from the USB flash drive
only, proceed as follows.
1
Select DELE ALL MEM CLP in the
MEMORY REC page of the
OPERATION menu, and then press the
MENU knob.
The message "EXECUTE OK?" appears.
2
Select "YES", and then press the
MENU knob.
During the execution of the deletion, the
message "MEMORY ACCESS" appears in
the viewfinder and on the LCD monitor.
When processing finishes, the message
"COMPLETE" appears.
All of the proxy data in the USB flash drive
is deleted.
To format a USB flash drive
Proceed as follows to format a USB flash drive
with the FAT32 file system.
1
Select FORMAT MEMORY in the
MEMORY REC page of the