White Balance Memory; Gain Value; Operation/Alarm Message Display Area - Sony PDW-F800 Operation Manual

REC2: Appears when HDSDI REMOTE I/F in
the CAM CONFIG 1 page of the
MAINTENANCE menu is set to "CHARA",
and this unit is controlling recording by an
external device connected to the SDI OUT
1/2 connectors (HDSDI output).
SNGL: Appears when SINGLE CLIP MODE in
the CAM CONFIG 1 page of the
MAINTENANCE menu is set to "ON", and
the unit is searching or playing a clip (see
page 86).
1) SDI OUT 1 SELECT or SDI OUT 2 SELECT on the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
b Setting change and adjustment
progress message display area
For details, see "Change confirmation/adjustment
progress messages" on page 215.
c External input status and aberration
correction function
EXT HDSDI/SDSDI/VBS: When the REC
VIDEO SOURCE item on the SOURCE SEL
page of the OPERATION menu has been set
to EXT, then "EXT" and the signal type
(HDSDI, SDSDI, or VBS) flashes when a
valid signal is input to this unit.
For details, see "Recording video from external
devices" on page 106.
ALAC: Appears when ALAC in the CAM
CONFIG 3 page of the MAINTENANCE
menu is set to "AUTO" (see page 192).
d Electric color temperature filter/Scene
file number
The electric color temperature filter display
appears when the CC 5600K function is set to
ON.
When DISP SCENE FILE on the VF DISP 3 page
of the OPERATION menu is set to "ON", the
number of the currently loaded scene file ("S1" to
"S5") appears instead of the filter display.
e Filter
Indicates the currently selected filter type (see
page 18).
[F800]
The optical CC filter position (A, B, C, or D)
appears to the right side of the ND filter display
(1 to 4).
[700]
When the function that switches between
electrical CC filters has been assigned to an
ASSIGN switch (see page 65), and when a
remote control unit has been connected, the
1)
electrical CC filter position (A, B, C, or D)
appears to the right side of the ND filter display
(1 to 4).
f White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
A: Displayed when the WHITE BAL switch is set
to A.
B: Displayed when the WHITE BAL switch is set
to B.
P: Displayed when the WHITE BAL switch is set
to PRST or when the preset button on an RM-
B150 has been pushed.
T: Displayed when ATW is being used.
3200: Displayed when the COLOR TEMP SW
3200K function is set to ON.
4300: Displayed when the COLOR TEMP SW
4300K function is set to ON.
5600: Displayed when the COLOR TEMP SW
5600K function is set to ON.
6300: Displayed when the COLOR TEMP SW
6300K function is set to ON.
1) PDW-700 only
g Timecode
Indicates the elapsed recording/playback time,
timecode, user bits or other information selected
by the DISPLAY switch (see page 24).
h Gain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.
i Shutter speed
Indicates the shutter speed or the shutter mode.
However, if the SHUTTER selector (see page 18)
is set to OFF, nothing is displayed.
For details of the displayed shutter speed, see
"Setting the Electronic Shutter" on page 67.
j Operation/alarm message display area
For details, see "Operation/alarm messages" on
page 266.
Locations and Functions of Parts and Controls
1)
1)
1)
1)
37