Color Temperature - Sony PDW-850 Operation Manual

The lighting-up conditions of each item can be set
on the '!' LED STD page of the OPERATION
menu.
1) The standard SHUTTER setting differs, depending on
the recording format.
1080/50i, 1080/59.94i, 720/50P, 720/59.94P: The
SHUTTER selector is set to OFF.
1
1080/23.98P: / shutter is ON.
48
1
1080/25P: / shutter is ON.
50
1
1080/29.97P: / shutter is ON.
60
2) When SHUTTER SELECT on the SHUTTER
SELECT page of the MAINTENANCE menu is set to
DEGREE, the standard setting is "SHUTTER
selector: OFF", regardless of the recording format.
Layout of the status display on the
viewfinder screen
The viewfinder screen displays not only the video
picture but also characters and messages
indicating the camcorder settings and operating
status, a center marker, a safety zone marker, etc.
When the menu screen is not displayed and the
DISPLAY of the DISPLAY/ASPECT switch is
set to on, the items for which an ON setting was
made on the VF DISP 1, VF DISP 2, or VF DISP
3 page of the OPERATION menu or with related
switches are displayed at the top and bottom of
the screen.
The messages that give details of the settings and
adjustment progress and results can also be made
to appear for about three seconds while settings
are being changed, during adjustment, and after
adjustment.
For details about the display item selection, see
"Selecting the display items" (page 201).
For details about setting change and adjustment
progress messages, see "Change confirmation/
adjustment progress messages" (page 203).
For details about marker display, see "Setting the
marker display" (page 203).
All items that can be displayed on the viewfinder
screen are shown below.
28 Locations and Functions of Parts and Controls
Top of viewfinder screen
ab c d e f
59.9 i[ 30]
E X Z 99
H D 4 2 2 5 0 E 0 0 0 1 : 0 0 1 / 0 0 4 D C I N
13.9 K +
C O N T
F A N
W H I T E : N G
L E V E L T O O H I G H
R E C 2 T C G 0 1 : 2 3 : 4 5 : 1 5 H D S D I
5600 L O W L I G H T
1 W:A 18 dB 1/ 2000
jk l
a Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 0.0 K to 99.9 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the OFFSET WHT setting (see
page 217).
No display: OFFSET WHT is OFF
+: The value of OFFSET WHT is greater than
3200K.
–: The value of OFFSET WHT is less than
3200K.
b Video format
Indicates the format of video being currently
played back or recorded (see page 53).
The video aspect ratio (16:9 or 4:3) can also be
displayed when the recording format is set to
IMX 50, IMX 40, IMX 30, or DVCAM.
c Extender
Displays the extender settings of this unit and the
lens.
EX: The lens extender is on.
08: The lens shrinker is on.
x2D: The unit's digital extender is x2.
Ex2D: The lens extender is on, and the unit's
digital extender is x2.
x3D: The unit's digital extender is x3.
Ex3D: The lens extender is on, and the unit's
digital extender is x3.
x4D: The unit's digital extender is x4.
Ex4D: The lens extender is on, and the unit's
digital extender is x4.
d Zoom position
Indicates the zoom position of the zoom lens in
the range from 0 to 99.
g h i
W 1 2 13.4V
Ext.
35-30
3G/4G
E X T
1 35 30 - 125C F1.7
2
m n