Eject Motor - Oki ES5112dn Maintenance Manual

4.2.19 Eject Motor

(1) Remove the Cover-Side-R and Cover–Side-L. (Refer to 4.2.4 / 4.2.5)
(2) Remove the CU-Board. (Refer to 4.2.6)
(3) Remove the Cover Assy Stacker. (Refer to 4.2.13)
(4) Remove the Fuser Assy. (Refer to 4.2.15)
(5) Remove the Cover Assy Rear. (Refer to 4.2.17)
(6) Remove the Guide-Eject-Lower-Assy. (Refer to 4.2.18)
(7) Remove the two screws (Silver) ①
Gear ③ .
(8) Remove the two screws (Silver) ④
(9) Assembling is performed by the inverse procedure with removing.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
Plate-Gear-Exit ② and
. Remove the
Eject-Motor ⑤ .
. Remove the
⑤
4. REPLACEMENT OF PARTS
FFC cable
①
④
②
③
4-21