4.2.11 Cover Assy OPE
(1) Remove the Cover-Side-R and Cover–Side-L. (Refer to 4.2.4 / 4.2.5)
(2) Remove the Plate-Shield. (Refer to 4.2.6)
(3) Remove the FFC cable from the CU-board.
(4) Remove the two screws (Black) ① . Remove the Cover-Assy-Ope ② .
(5) Assembling is performed by the reverse procedure with removing.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
①
②
①
4.2.12 Ope PCB Assy
(1) Remove the Cover Assy Ope. (Refer to 4.2.11)
(2) Remove the two screws (Black) ① .
(3) Remove the Ope PCB Assy ② .
(4) Remove the FFC cable and the LCD ③ .
(5) Assembling is performed by the reverse procedure with removing.
(Note on removing / assembling)
1. When remove the LCD ③ , remove the two tab together, beware of not
to load to LCD
4. REPLACEMENT OF PARTS
③
①
②
①
4-14