Drive Shaft E (Eject) And Eject Roller - Oki OKIFAX4550 Maintenance Manual

4.3.13 Drive Shaft E (Eject) and Eject Roller

(1) Disassembly procedure
a) First, carry out procedure up to the point
of the 4.3.2 (ID Unit, Cover-Rear and
Cover-MAIN).
b) Remove two screws 1 from Cover Heat
Assembly (section 4.3.14), lift the heat
assay, and dismount idle gear E (A) and
idle gear E (B).
c) Unlock and dismount drive shaft E
(Eject).
d) Dismount two eject rolles.
(2) Reassembly procedure
Reverse the disassembly procedures.
41309401TH Rev.4
Drive shaft E (Eject)
Eject roller
Screw 1
Idle gear E (B)
Screw 1
Idle gear E (A)
172 /