Plate Side R Assy / Plate Side L Assy / Front Assy - Oki ES5112dn Maintenance Manual

4.2.20 Plate Side R Assy / Plate Side L Assy / Front Assy

(1) Remove the Cover-Side-R and Cover–Side-L. (Refer to 4.2.4 / 4.2.5)
(2) Remove the CU-Board. (Refer to 4.2.6)
(3) Remove the Power Supply Unit. (Refer to 4.2.7)
(4) Remove the DC Motor. (Refer to 4.2.8)
(5) Remove the Hoppng / MPT / Regist Clutch. (Refer to 4.2.9)
(6) Remove the HV-Board / Motor-FAN. (Refer to 4.2.10)
(7) Remove the Cover-Assy OPE. (Refer to 4.2.11)
(8) Remove the Cover Assy Stacker. (Refer to 4.2.13)
(9) Remove the Fuser Assy. (Refer to 4.2.15)
(10) Remove the MPT Assy. (Refer to 4.2.16)
(11) Remove the Cover Assy Rear. (Refer to 4.2.17)
(12) Remove the Guide Eject Lower Assy. (Refer to 4.2.18)
(13) Remove the screw(Black) ① and the two screws(Silver) ② and separate
the Plate Side L Assy.
(14) Remove the screw(Silver) ③
⑤
and separate the Plate Side R Assy.
(15) Remove the two screws (Silver) ⑥
(16) Assembling is performed by the inverse procedure with removing.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
screw(Black) ④ and the two screws(Silver)
,
Front Assy.
. Remove the
②
①
⑥
Front Assy
⑥
4. REPLACEMENT OF PARTS
Plate side L Assy
Plate side R Assy
④
③
4-22
⑤
⑤