4.2.21 Plate Side L Assy
(1) Separate the Plate Side L Assy. (Refer to 4.2.20)
(2) Remove the four screws (Silver) ①
Spring-Lock-Cassette ③ .
(3) Remove Lever-Sensor Cassette ④ and Spring-Sensor ⑤ from the Guide-
②
Cassette-L
.
(4) Remove the two screws (Silver) ⑥
(5) Remove the screw (Black) ⑧ , disengage the two tabs (a and b), and
remove Guide-ID-L ⑨ .
(6) Remove the Spring-ID-Lock-L ⑩
(7) Assembling is performed by the inverse procedure with removing.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
Guide-Cassette-L ② and
. Remove the
Frame-inner-L ⑦ .
. Remove the
.
⑩
⑨
b
a
②
④
⑤
4. REPLACEMENT OF PARTS
⑧
⑦
⑥
③
①
4-23