Monitor And Cue Functions - Yamaha QL5 Reference Manual

Hide thumbs Also See for QL5:
Table of Contents

Advertisement

Monitor and Cue functions

The Monitor function lets you monitor various outputs through your nearfield monitors or
headphones. Below the front panel of the QL series console is a PHONES out jack for
monitoring, which enables you to monitor the monitoring source signal at any time. By
assigning the MONITOR OUT L/R/C channels to the desired output jacks, you can also
monitor the same signal through external speakers.
You can select the following signals as the monitor source.
• STEREO channel output signal
• MONO channel output signal
• STEREO+MONO channel output signal
• INPUT 25-26, 27-28, 29-30, 31-32 (9-10, 11-12, 13-14, 15-16 for the QL1) channel input
signal (for monitoring a two channel pair)
• RECORDER PLAYBACK output signal
• A combination of up to eight MIX, MATRIX, STEREO, or MONO channel output
signals, RECORDER PLAYBACK output signals, and INPUT 25-26, 27-28, 29-30, 31-
32 (9-10, 11-12, 13-14, 15-16 for the QL1) input signals
The Cue function enables you to check an individual channel or DCA group by temporarily
monitoring it via MONITOR OUT or PHONES. When you press the [CUE] key on the top
panel, the cue signal of the corresponding channel or DCA group is sent as the monitor output
from the selected output port.
NOTE
Be aware that if you turn CUE INTERRUPTION off in the MONITOR popup window, the cue
signal will no longer be sent to the connected monitor speakers. However, the cue signal will
always be sent to the PHONES Out jack.
The following diagram shows the cue/monitor signal flow.
CUE / STEREO MONITOR
CUE TRIM
(INPUT/OUTPUT/DCA)
MONO
CUE L
METER
CUE L BUS
CUE R
METER
CUE R BUS
INPUT 25/26{9/10}
INPUT 27/28{11/12}
INPUT 29/30{13/14}
INPUT 31/32{15/16}
PLAYBACK OUT
STEREO OUT L,R
STEREO OUT MONO(C)
MONO
STEREO OUT L,C,R
MONITOR L
METER
INPUT 25/26{9/10}
INPUT 27/28{11/12}
MONITOR R
METER
INPUT 29/30{13/14}
INPUT 31/32{15/16}
DEFINE
MONITOR MONO(C)
METER
PLAYBACK OUT
MIX
STEREO OUT L,R
(MAX:8ch)
STEREO OUT MONO(C)
CUE INTERRUPTION
MIX OUT1-16
MATRIX OUT1-8
CUE / SURROUND MONITOR
CUE TRIM
(INPUT/OUTPUT/DCA)
CUE L
METER CUE L
CUE L BUS
CUE R
METER CUE R
CUE R BUS
Surround
Monitor
Select
6
STEREO OUT L/R
MIX OUT1-6
6
MONO
EXT IN 5.1-1
6
6
PLAYBACK OUT
EXT IN 5.1-2
MIX OUT1-16
2ch
6
EXT IN 5.1-3
MATRIX OUT1-8
Monitor
2
2
2ch selected
EXT IN ST-1
Select
EXT IN ST-2
EXT IN ST-3
EXT IN ST-4
EXT IN ** are assignable from DANTE, SLOT, INPUT
• MONITOR SELECT
Selects the monitor source.
• METER
Detects and indicates the level of the monitor signal or cue signal.
• DIMMER
Attenuates the monitor/cue signal by a fixed amount.
• MONITOR LEVEL
Adjusts the output level of the MONITOR OUT L/R/C channels. If PHONES LEVEL LINK
is ON, this setting will also affect the level at the PHONES Out jack.
96
Monitor and Cue functions
MONITOR DELAY AUTO BYPASS
CUE ON
CUE OUT ON
DELAY
CUE OUT L
(MAX:1000ms)
To OUTPUT PATCH
CUE OUT R
DELAY
To OUTPUT PATCH
(MAX:1000ms)
CUE OUT
LEVEL
CUE LOGIC
PHONES
LEVEL LINK
DELAY
PHONES L
To PHONES OUT
(MAX:1000ms)
PHONES R
DELAY
To PHONES OUT
(MAX:1000ms)
MONITOR OUT L
DELAY
(MAX:1000ms)
MONITOR OUT R
DELAY
(MAX:1000ms)
MONITOR OUT MONO(C)
DELAY
ON
(MAX:1000ms)
+MONO(C)
ON
An output port delay becomes invalid by
assigning a monitor out to the output port.
TALKBACK ON
MONITOR
MONITOR
MONITOR DIMM ON
LEVEL
FADER
MONITOR DELAY AUTO BYPASS
CUE ON
CUE OUT ON
DELAY
CUE OUT L
(MAX:1000ms)
To OUTPUT PATCH
CUE OUT R
DELAY
To OUTPUT PATCH
(MAX:1000ms)
CUE OUT
LEVEL
CUE LOGIC
PHONES
LEVEL LINK
DELAY
PHONES L
(MAX:1000ms)
To PHONES OUT
PHONES R
DELAY
To PHONES OUT
(MAX:1000ms)
MONITOR
LEVEL
CUE INTERRUPTION
ON
METER
SPEAKER MUTE
DELAY
(MAX:1000ms)
DELAY
(MAX:1000ms)
DELAY
(MAX:1000ms)
DELAY
(MAX:1000ms)
DELAY
(MAX:1000ms)
DELAY
(MAX:1000ms)
5.1 Solo
An output port delay becomes invalid by
assigning a monitor out to the output port.
Down Mix 5.1 -> Stereo, Mono
MONITOR
MONITOR
LEVEL
FADER
To OUTPUT PATCH
MONITOR MATRIX OUT
To SLOT
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
L
R
C
To OUTPUT PATCH
SURROUND MONITOR
To DANTE,OMNI OUT,SLOT
Ls
Rs
LFE
Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ql1Ql series

Table of Contents