Table of Contents
Advertisement
Table 17 Network > WAN > Internet Connection: PPPoE Encapsulation (continued)
LABEL
DESCRIPTION
First DNS Server
Select Obtained From ISP if your ISP dynamically assigns DNS server information (and
the EMG3425-Q10A's WAN IP address). The field to the right displays the (read-only)
Second DNS
DNS server IP address that the ISP assigns.
Server
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's
Third DNS Server
IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
WAN MAC Address
The MAC address section allows users to configure the WAN port's MAC address by using
the EMG3425-Q10A's MAC address, copying the MAC address from a computer on your
LAN or manually entering a MAC address.
Factory default
Select Factory default to use the factory assigned default MAC Address.
Clone the
Select Clone the computer's MAC address - IP Address and enter the IP address of
computer's MAC
the computer on the LAN whose MAC you are cloning.
address - IP
Address
Set WAN MAC
Select this option and enter the MAC address you want to use.
Address
IPv6 DNS server
This is not available when you select IPv4 Only in the IPv6/IPv4 field.
Obtain IPv6 DNS
Select this to have the EMG3425-Q10A get the IPv6 DNS server addresses from the ISP
info Automatically
automatically.
Use the following
Select this to have the EMG3425-Q10A use the IPv6 DNS server addresses you configure
Static DNS IPv6
manually.
Address
IPv6 DNS Server
Enter the IPv6 DNS server address assigned by the ISP.
Apply
Click Apply to save your changes back to the EMG3425-Q10A.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 8 WAN
EMG3425-Q10A User's Guide
67
Advertisement
Table of Contents
