Table of Contents
Advertisement
Figure 114 Access Point Mode
25.10 Sys OP Mode Screen
Use this screen to select how you want to use your EMG3425-Q10A.
Note: If you select the incorrect System Operation Mode you may not be able to connect
to the Internet.
Figure 115 Maintenance > Sys OP Mode
The following table describes the labels in the Sys OP Mode screen.
Table 79 Maintenance > Sys OP Mode
LABEL
Configuration Mode
Router Mode
Chapter 25 Maintenance
DESCRIPTION
Select Router Mode if your device routes traffic between a local network and another
network such as the Internet. This mode offers services such as a firewall or bandwidth
management.
You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.
EMG3425-Q10A User's Guide
184
Advertisement
Table of Contents
