Displaying Mab Details - Cisco Catalyst 4500 Series Configuration Manual

Chapter 44 Configuring 802.1X Port-Based Authentication
mab Not run

Displaying MAB Details

The following commands display these details:
Switch# show mab all
MAB details for FastEthernet5/9
-------------------------------------
Mac-Auth-Bypass
Inactivity Timeout
Switch# show mab all detail
MAB details for FastEthernet5/9
-------------------------------------
Mac-Auth-Bypass
Inactivity Timeout
MAB Client List
---------------
Client MAC
MAB SM state
Auth Status
Switch# show mab int fa5/9
MAB details for FastEthernet5/9
-------------------------------------
Mac-Auth-Bypass
Inactivity Timeout
Switch# show mab int fa5/9 detail
MAB details for FastEthernet5/9
-------------------------------------
Mac-Auth-Bypass
Inactivity Timeout
MAB Client List
---------------
Client MAC
MAB SM state
Auth Status
EPM Logging
EPM logging enables you to display EPM logging messages by using the epm logging command in
global configuration mode. To disable EPM logging, enter no epm logging.
Logging messages are displayed during the following events:
•
•
•
•
Example 1
Switch# conf t
Enter configuration commands, one per line.
OL-25340-01
= Enabled
= None
= Enabled
= None
= 000f.23c4.a401
= TERMINATE
= AUTHORIZED
= Enabled
= None
= Enabled
= None
= 000f.23c4.a401
= TERMINATE
= AUTHORIZED
POLICY_APP_SUCCESS—Policy application success events on Named ACLs, Proxy ACLs, and
service policies, URL redirect policies.
POLICY_APP_FAILURE—Policy application failure conditions similar to unconfigured policies,
wrong policies, download request failures and download failures from AAA.
IPEVENT—IP assignment, IP release and IP wait events for clients.
AAA—AAA events (similar to download requests, or download successes from AAA)
End with CNTL/Z.
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
Displaying Authentication Details
44-117