Message Contents - Cisco Catalyst 4500 Series Configuration Manual

Chapter 65 Configuring Call Home
Table 65-3 Call Home Alert Groups, Events, and Actions (continued)
Call Home
Alert Group Trigger Event
REMOVAL
Diagnostic
Failure
Test TEST
Configuration

Message Contents

The following tables display the content formats of alert group messages:
•
•
•
•
Table 65-4
Data Item
Device identification
Date/time stamp
OL-25340-01
Syslog Event
Module
Table 65-4 describes the content fields of a short text message.
Table 65-5 describes the content fields that are common to all long text and XML messages. The
fields specific to a particular alert group message are inserted at a point between the common fields.
The insertion point is identified in the table.
Table 65-6 describes the inserted content fields for reactive messages (system failures that require a
TAC case) and proactive messages (issues that might result in degraded system performance).
Table 65-7 describes the inserted content fields for an inventory message.
Format for a Short Text Message
Severity Description and CLI Commands Executed
1 A line card or supervisor engine has been removed
from a slot.
1/3/4/5 Events related to standard or intelligent line cards.
CLI commands executed:
show module
show version
show inventory
show buffers
show logging
show diagnostic result module x detail
show diagnostic result module all
1 User-generated test message.
CLI commands executed:
show module
show version
show inventory
1 User-generated request for configuration.
CLI commands executed:
show module
show inventory
show version
show running-config all
show startup-config
Description
Configured device name
Time stamp of the triggering event
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
Message Contents
65-21