Required Tools And Parts For Installing The Srx550 Services Gateway; Installation Instructions Warning - Juniper SRX550 Hardware Manual

SRX550 Services Gateway Hardware Guide

Required Tools and Parts for Installing the SRX550 Services Gateway

Related
Documentation

Installation Instructions Warning

Related
Documentation
62
To install the services gateway, you need the following tools and parts:
Phillips (+) screwdriver, number 2
Tie wrap
Electrostatic discharge (ESD) grounding wrist strap
Installation Overview for the SRX550 Services Gateway on page 61
Installing the SRX550 Services Gateway in a Rack on page 71
SRX550 Services Gateway Safety Requirements, Warnings, and Guidelines on page 164
WARNING: Read the installation instructions before you connect the services
gateway to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
SRX550 Services Gateway General Safety Guidelines and Warnings on page 163
Rack-Mounting Requirements and Warnings on page 39
Copyright © 2015, Juniper Networks, Inc.