Chassis Description; Srx550 Services Gateway Chassis; Table 5: Physical Specifications For The Srx550 Services Gateway; Chapter 3 Chassis Description - Juniper SRX550 Hardware Manual

CHAPTER 3

Chassis Description

SRX550 Services Gateway Chassis

Copyright © 2015, Juniper Networks, Inc.
SRX550 Services Gateway Chassis on page 13
SRX550 Services Gateway Front Panel on page 14
SRX550 Services Gateway Front Panel LEDs on page 17
SRX550 Services Gateway Back Panel on page 20
The SRX550 Services Gateway chassis is a rigid sheet metal structure that houses all
the other hardware components.
Table 5 on page 13 provides information about the physical specifications for the services
gateway.

Table 5: Physical Specifications for the SRX550 Services Gateway

Physical Specification
Chassis height
Chassis width
Chassis depth
Chassis weight (includes one power supply without any
GPIMs or Mini-PIMs)
CAUTION: Before removing or installing components of a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the device.
The services gateway must be connected to earth ground during normal operation. The
protective earthing terminal on the side of the chassis is provided to connect the services
gateway to ground. Additional grounding is provided to an AC-powered services gateway
when you plug its power supply into a grounded AC power receptacle.
Value
2 rack units (U)
17.5 in. (44.4 cm)
18.2 in. (46.2 cm)
21.96 lb (9.96 kg)
13