Cable Specifications And Pinouts; Interface Cabling And Wiring Specifications For The Srx550 Services; Gateway; Table 19: Cable And Wire Specifications For Ports And Alarm Interfaces - Juniper SRX550 Hardware Manual

CHAPTER 11

Cable Specifications and Pinouts

Interface Cabling and Wiring Specifications for the SRX550 Services Gateway
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.

Interface Cabling and Wiring Specifications for the SRX550 Services

Gateway on page 55
RJ-45 Connector Pinouts for the SRX550 Services Gateway Ethernet Port on page 56
RJ-45 Connector Pinouts for the SRX550 Services Gateway Console Port on page 56
The network interfaces supported on the services gateway accept different kinds of
network cables. Table 19 on page 55
to ports on the services gateway.

Table 19: Cable and Wire Specifications for Ports and Alarm Interfaces

Cable
Port Specification
Console RS-232 (EIA-232)
serial cable
USB USB
console
Ethernet Category 5 cable or
equivalent suitable
for 100Base-T
operation
NOTE: The Auxiliary port is not supported on the SRX550 Services Gateway.
RJ-45 Connector Pinouts for the SRX550 Services Gateway Ethernet Port on page 56
RJ-45 Connector Pinouts for the SRX550 Services Gateway Console Port on page 56
lists the specifications for the cables that connect
Cable/Wire Supplied
One 6-ft (1.83-m) length
with DB-9/DB-9
connectors
One 6-ft (1.83-m) length
with Mini-B and Type A
plugs
One 15-ft (4.57-m) length
with RJ-45/RJ-45
connectors
Maximum Device
Length Receptacle
6 ft (1.83 m) RJ-45
6 ft (1.83 m) Mini-B USB
Socket
328 ft RJ-45
(100 m) autosensing
55